Measurements with the technical prototype for the Mu3e tile detector

• Verfasst von: Klingenmeyer, Hannah [VerfasserIn]
• Verfasst von: Munwes, Yonathan [VerfasserIn]
• Verfasst von: Briggl, Konrad [VerfasserIn]
• Verfasst von: Zhong, Tiancheng [VerfasserIn]
• Verfasst von: Chen, Huangshan [VerfasserIn]
• Verfasst von: Shen, Wei [VerfasserIn]
• Verfasst von: Schultz-Coulon, Hans-Christian [VerfasserIn]
• Titel: Measurements with the technical prototype for the Mu3e tile detector
• Verf.angabe: Hannah Klingenmeyer, Yonathan Munwes, Konrad Briggl, Tiancheng Zhong, Huangshan Chen, Wei Shen, Hans-Christian Schultz-Coulon
• Jahr: 2020
• Jahr des Originals: 2019
• Umfang: 5 S.
• Fussnoten: Available online 25 September 2019 ; Gesehen am 27.03.2020
• Titel Quelle: Enthalten in: Nuclear instruments & methods in physics research / A
• Ort Quelle: Amsterdam : North-Holland Publ. Co., 1984
• Jahr Quelle: 2020
• Band/Heft Quelle: 958(2020) Artikel-Nummer 162852, 5 Seiten
• ISSN Quelle: 1872-9576
• DOI: doi:10.1016/j.nima.2019.162852
• Datenträger: Online-Ressource
• Sprache: eng
• Sach-SW: Mu3e
• Sach-SW: Photon detectors
• Sach-SW: Silicon photomultipliers
• K10plus-PPN: 1693399393

Abstract

The tile detector is a dedicated timing detector developed for the Mu3e experiment, which is designed to search for the lepton-flavour violating (LFV) decay μ→eee with a target sensitivity of 10−16. In order to determine the vertex and coincident time of the three decay electrons, precise spatial and timing measurements are necessary, resulting in the requirement of a time resolution below 100 ps for the tile detector. The tile detector, which is currently being developed at the Kirchhoff Institute for Physics, Heidelberg University, employs plastic scintillator tiles and silicon photomultipliers which are read out by dedicated 32-channel mixed signal readout ASICs. Measurements using the first technical prototype of the tile detector in two testbeam campaigns, undertaken at the Deutsches Elektron-Synchrotron (DESY) in Hamburg, Germany in February and June 2018, show a preliminary single channel timing resolution of about 47 ps, which is well below the required resolution of 100 ps. Furthermore, the production and assembly procedures for the final detector system were defined based on the experience gained from the construction of the prototype. Thermal simulation studies using the prototype provided additional input for the finalisation of the detector structure.